No products in the cart.
Shred & Polish Stack
Price range: $480.25 through $828.00
The Shred & Polish Stack is a comprehensive body recomposition system designed to support lean muscle definition, metabolic efficiency, and structured fat loss. This precision-formulated trio works through complementary hormonal and mitochondrial pathways to enhance recovery, optimize energy utilization, and reinforce natural growth hormone signaling. By targeting body composition at the cellular level, the Shred & Polish Stack supports sustainable refinement rather than short-term weight fluctuations.
This Stack Includes:
- MOTS-c (10mg) | A mitochondrial-derived peptide that supports metabolic flexibility and cellular energy production. MOTS-c helps optimize glucose utilization, fat metabolism, and systemic energy efficiency.
- CJC-1295 (W/ DAC) (5mg) | A long-acting growth hormone releasing hormone analogue designed to stimulate natural growth hormone production over an extended period.
- Ipamorelin (10mg) | A selective growth hormone secretagogue that stimulates natural growth hormone release without significantly affecting cortisol or prolactin levels.
Goal:
To enhance metabolic efficiency and physique refinement by improving insulin sensitivity, optimizing growth hormone signalling, and increasing mitochondrial fuel utilization while maintaining lean muscle density and sustained energy output.
Usage Guidelines For Shred & Polish Stack
Usage Guidelines
The Shred & Polish Stack is designed for use in structured cycles to support metabolic recalibration, fat oxidation, and lean muscle preservation. This protocol works synergistically to enhance mitochondrial efficiency, improve insulin sensitivity, maintain elevated growth hormone signalling, and promote lipolysis while preserving muscle integrity. Cycle length should be tailored to physique goals, caloric strategy, and training intensity. This system is ideal during cutting phases, conditioning blocks, or recomposition cycles where the objective is improved definition without sacrificing performance.
By combining targeted mitochondrial support with systemic growth hormone modulation, the Shred & Polish Stack promotes improved glucose partitioning, enhanced fat utilization, leaner body composition, and a firmer, more defined muscular appearance.
Half Cycle
1.5 months
Recommended for first-time users or individuals initiating a structured fat-loss or conditioning phase. This cycle supports improved insulin sensitivity, enhanced fat metabolism, preserved muscle fullness, and better recovery capacity while allowing the body to assess metabolic response and tolerance.
Full Cycle
3 months
Intended for individuals pursuing deeper metabolic refinement and sustained body recomposition. This extended cycle reinforces advanced fat oxidation pathways, promotes enhanced glycogen uptake into muscle cells, supports long-term mitochondrial efficiency, and helps maintain dense, defined musculature during caloric restriction.
General Guidance
- Follow established research protocols
- Allow adequate off cycle recovery
- Not intended for individuals under 18
- Consult a qualified healthcare professional before use
Seek Guidance From a Medical Professional
Before contemplating the usage of anabolic steroids, it’s essential to seek advice from a qualified healthcare professional. They can evaluate your general health, discuss possible risks and advantages, and offer personalized guidance based on your specific needs.
Get High-Quality Items From Trusted Sources
Make sure to procure anabolic steroids from trustworthy sources to reduce the likelihood of receiving counterfeit or tainted products. Only buy from reliable suppliers who adhere to quality control standards and have a favorable reputation within the community.
Start Slow and Progress Gradually
If you opt to incorporate anabolic steroids, it is recommended to initiate the regimen with the smallest effective dosage. Incrementally raise the dosage if required, while closely monitoring your body’s reactions and any potential adverse effects.
Prioritize Proper Post-Cycle Therapy
Following the conclusion of a steroid cycle, it’s crucial to engage in a thorough post-cycle therapy routine. This aids in restoring natural hormone production, minimizing side effects, and preserving overall health and well-being.
When to Take it
Cycle Length
1.5 Months
Items Included
- MOTS-c (10mg)
3x Vials - CJC-1295 DAC (5mg)
3x Vials - Ipamorelin (10mg)
1x Vials
Dosage & Frequency
- MOTS-c (10mg)
5–10mg weekly (split into 2–3 injections) - CJC-1295 (W/ DAC) (5mg)
2mg once weekly (1 dose) - Ipamorelin (10mg)
200mcg daily (pre-bed)
Need Help With the
Correct Peptide Mix?
Our peptide mixing calculator takes the guesswork out of dosing, giving you an exact, easy-to-follow guide based on your vial, syringe, and target dosage. Whether you’re new to peptides or simply want to double-check your math, we’ve made it simple and straightforward.
Just enter your total syringe volume, the amount of peptide in your vial, how much water you’re adding, and your desired peptide dose. The calculator will do the rest — making sure you get accurate measurements for safe, consistent use every time.
For A MCG Dose, Draw Up To Tick Mark .
These ranges are general, research-use suggestions to help you prepare your peptides. This calculator and recommended doses are not medical advice. Start low, assess tolerance, and adjust cautiously.
Our Guide to
Intramuscular Injection
Gather Your
Equipment
If you’re new to the process of injection, ensure you have all the essential supplies at your disposal before commencing. This includes the injectable substance, a sterile disposable syringe and needle, alcohol wipes, a secure container for proper needle disposal, cotton balls or gauze pads for cleansing, and optionally, a mirror for self-injection, if required. Having these items readily available ensures a seamless and uninterrupted injection process. It is vital to prioritize safety and efficiency to position your body optimally for health and longevity.
Compound
Extraction
Once all the necessary materials are assembled, proceed to extract the substance from the vial. Keep the vial upright, slowly pull back the plunger to draw the prescribed dosage into the syringe. Be careful to extract the exact amount prescribed, adhering to the instructions provided by your healthcare professional. After filling the syringe, gently tap it to dislodge any air bubbles. If any air bubbles are present, push the plunger up slightly to eliminate them, ensuring that only the specified amount of the substance is in the syringe. Familiarize yourself with the proper injection depth before advancing to the next step.
Preparation Before
Injection
Before administering your injection, choose a well-lit and clean area. Prior to starting, wash your hands thoroughly with soap and water to maintain hygiene. Once your workspace is prepared, ready the injection site, which could be the buttocks (gluteal muscles), thighs, or upper arm (deltoid muscle). Seek guidance from your healthcare provider on the appropriate site. Regardless of the chosen site, use an alcohol wipe to cleanse it, removing any dirt, oils, or contaminants. Allow the area to air dry completely after the cleaning process.
Compound
Administration
With the syringe prepared, it’s time to administer the injection. Hold the prepared syringe and carefully insert the needle into the designated injection site. Once the needle is inserted at the correct depth, pull back slightly on the plunger to confirm that you haven’t hit a blood vessel. If blood appears in the syringe, retract the needle and attempt again with a new needle tip. Assuming there is no blood, steadily and slowly push the plunger to inject the substance. Take your time to ensure a controlled and comfortable administration of the injection. After the full dosage is administered, withdraw the needle from the injection site.
Cycle Length
3 Months
Items Included
- MOTS-c (10mg)
6x Vials - CJC-1295 DAC (5mg)
5x Vials - Ipamorelin (10mg)
2x Vials
Dosage & Frequency
- MOTS-c (10mg)
5–10mg weekly (split into 2–3 injections) - CJC-1295 (W/ DAC) (5mg)
2mg once weekly (1 dose) - Ipamorelin (10mg)
200mcg daily (pre-bed)
Need Help With the
Correct Peptide Mix?
Our peptide mixing calculator takes the guesswork out of dosing, giving you an exact, easy-to-follow guide based on your vial, syringe, and target dosage. Whether you’re new to peptides or simply want to double-check your math, we’ve made it simple and straightforward.
Just enter your total syringe volume, the amount of peptide in your vial, how much water you’re adding, and your desired peptide dose. The calculator will do the rest — making sure you get accurate measurements for safe, consistent use every time.
For A MCG Dose, Draw Up To Tick Mark .
These ranges are general, research-use suggestions to help you prepare your peptides. This calculator and recommended doses are not medical advice. Start low, assess tolerance, and adjust cautiously.
Our Guide to
Intramuscular Injection
Gather Your
Equipment
If you’re new to the process of injection, ensure you have all the essential supplies at your disposal before commencing. This includes the injectable substance, a sterile disposable syringe and needle, alcohol wipes, a secure container for proper needle disposal, cotton balls or gauze pads for cleansing, and optionally, a mirror for self-injection, if required. Having these items readily available ensures a seamless and uninterrupted injection process. It is vital to prioritize safety and efficiency to position your body optimally for health and longevity.
Compound
Extraction
Once all the necessary materials are assembled, proceed to extract the substance from the vial. Keep the vial upright, slowly pull back the plunger to draw the prescribed dosage into the syringe. Be careful to extract the exact amount prescribed, adhering to the instructions provided by your healthcare professional. After filling the syringe, gently tap it to dislodge any air bubbles. If any air bubbles are present, push the plunger up slightly to eliminate them, ensuring that only the specified amount of the substance is in the syringe. Familiarize yourself with the proper injection depth before advancing to the next step.
Preparation Before
Injection
Before administering your injection, choose a well-lit and clean area. Prior to starting, wash your hands thoroughly with soap and water to maintain hygiene. Once your workspace is prepared, ready the injection site, which could be the buttocks (gluteal muscles), thighs, or upper arm (deltoid muscle). Seek guidance from your healthcare provider on the appropriate site. Regardless of the chosen site, use an alcohol wipe to cleanse it, removing any dirt, oils, or contaminants. Allow the area to air dry completely after the cleaning process.
Compound
Administration
With the syringe prepared, it’s time to administer the injection. Hold the prepared syringe and carefully insert the needle into the designated injection site. Once the needle is inserted at the correct depth, pull back slightly on the plunger to confirm that you haven’t hit a blood vessel. If blood appears in the syringe, retract the needle and attempt again with a new needle tip. Assuming there is no blood, steadily and slowly push the plunger to inject the substance. Take your time to ensure a controlled and comfortable administration of the injection. After the full dosage is administered, withdraw the needle from the injection site.
Related products
-
Add to cart
-
Select options This product has multiple variants. The options may be chosen on the product page
-
Add to cart
-
Add to cart
