Melanotan II (10mg)

$55.00

Melanotan II is a potent synthetic peptide designed to replicate the body's natural alpha-melanocyte-stimulating hormone (1$\alpha$-MSH).2 Its primary power lies in stimulating deep, systemic melanin production, allowing users to achieve a dark, natural tan with a fraction of the usual UV exposure—effectively providing a "biological shield" against sunburn and photo-aging.3 Beyond its cosmetic applications, MT-2 is widely utilized as a "lifestyle peptide" for its distinct physiological bonuses: it significantly amplifies libido and sexual arousal while simultaneously acting as an appetite suppressant, making it a dual-threat for those looking to improve their physique and complexion simultaneously.
Melanotan II – Wikipedia
Generic Name:

Melanotan II 10mg

Compound Information:

Molecular Weight: 1024.18 g/mol
Formula: C50H69N15O9
Anabolic Rating: N/A
Androgenic Rating: N/A

AVG. PURITY

99.943%

AVG. MASS

9.91mg

Result date

In stock

SKU: PEP-(ZIO)-SKU-004 Categories:, , ,

Product Description

Appetite Suppression

Some individuals experience a decrease in appetite while using Melanotan, which may be attributed to its potential influence on brain receptors involved in hunger regulation. This appetite-suppressing effect can support weight management efforts by reducing calorie intake and promoting a feeling of fullness.

Increased Libido

Melanotan has been reported to enhance libido and sexual arousal in both men and women. This effect is believed to be related to Melanotan’s interaction with melanocortin receptors in the brain, which can influence sexual behavior and desire.

Enhanced Skin Pigmentation

Melanotan stimulates melanin production, the pigment responsible for skin coloration, resulting in a gradual darkening of the skin. This process mimics the effects of natural sun exposure, providing a tan-like appearance without prolonged UV exposure, thus reducing the risk of sunburn and premature aging.

Sunburn Protection

By inducing skin darkening, Melanotan provides a degree of natural sun protection by increasing the skin’s melanin content. This melanin acts as a shield against harmful UV radiation, reducing the risk of sunburn and skin damage associated with excessive sun exposure, while still allowing for the desired tanned appearance.

Dosage (Male)

250-500mcg per day

Dosage (Female)

250-500mcg per day

Dosage Frequency

Daily

Dosage Type

Subcutaneous Injection

Active Half-Life

Approximately 2-3 days

Chemical Name

Ac-Nle-cyclo [Asp-His-D-Phe-Arg-Trp-Lys]-NH2

Post-Cycle Therapy

No PCT required

Need Help With the
Correct Peptide Mix?

Our peptide mixing calculator takes the guesswork out of dosing, giving you an exact, easy-to-follow guide based on your vial, syringe, and target dosage. Whether you’re new to peptides or simply want to double-check your math, we’ve made it simple and straightforward.

Just enter your total syringe volume, the amount of peptide in your vial, how much water you’re adding, and your desired peptide dose. The calculator will do the rest — making sure you get accurate measurements for safe, consistent use every time.

For A MCG Dose, Draw Up To Tick Mark .

These ranges are general, research-use suggestions to help you prepare your peptides. This calculator and recommended doses are not medical advice. Start low, assess tolerance, and adjust cautiously.

Dosage (Male)

250-500mcg per day

Dosage (Female)

250-500mcg per day

Dosage Frequency

Daily

Dosage Type

Subcutaneous Injection

Our Guide to
Intramuscular Injection

Gather Your
Equipment

If you’re new to the process of injection, ensure you have all the essential supplies at your disposal before commencing. This includes the injectable substance, a sterile disposable syringe and needle, alcohol wipes, a secure container for proper needle disposal, cotton balls or gauze pads for cleansing, and optionally, a mirror for self-injection, if required. Having these items readily available ensures a seamless and uninterrupted injection process. It is vital to prioritize safety and efficiency to position your body optimally for health and longevity.

Compound
Extraction

Once all the necessary materials are assembled, proceed to extract the substance from the vial. Keep the vial upright, slowly pull back the plunger to draw the prescribed dosage into the syringe. Be careful to extract the exact amount prescribed, adhering to the instructions provided by your healthcare professional. After filling the syringe, gently tap it to dislodge any air bubbles. If any air bubbles are present, push the plunger up slightly to eliminate them, ensuring that only the specified amount of the substance is in the syringe. Familiarize yourself with the proper injection depth before advancing to the next step.

Preparation Before
Injection

Before administering your injection, choose a well-lit and clean area. Prior to starting, wash your hands thoroughly with soap and water to maintain hygiene. Once your workspace is prepared, ready the injection site, which could be the buttocks (gluteal muscles), thighs, or upper arm (deltoid muscle). Seek guidance from your healthcare provider on the appropriate site. Regardless of the chosen site, use an alcohol wipe to cleanse it, removing any dirt, oils, or contaminants. Allow the area to air dry completely after the cleaning process.

Compound
Administration

With the syringe prepared, it’s time to administer the injection. Hold the prepared syringe and carefully insert the needle into the designated injection site. Once the needle is inserted at the correct depth, pull back slightly on the plunger to confirm that you haven’t hit a blood vessel. If blood appears in the syringe, retract the needle and attempt again with a new needle tip. Assuming there is no blood, steadily and slowly push the plunger to inject the substance. Take your time to ensure a controlled and comfortable administration of the injection. After the full dosage is administered, withdraw the needle from the injection site.

Incorporate Melanotan II Into a Stack

Melanotan II, renowned for its role in skin pigmentation, offers more than a sun-kissed glow. When stacked with HGH or Sermorelin, it not only enhances tanning but also promotes anti-aging benefits and muscle growth. This versatile peptide also aids in appetite reduction, boosts libido, and enhances energy levels.

01

Draw 3ml of Bacteriostatic Water USP from the vial.

02

Carefully inject the Bacteriostatic Water into the product vial. Aim the stream along the side of the vial, avoiding direct contact with the lyophilized powder.

03

Gently swirl the vial to dissolve the powder completely. Ensure the solution becomes clear. Do not shake the vial vigorously.

04

After reconstituting with 3ml of bacteriostatic water, the concentration is 3.33mg/ml. Under this dilution, every 10 units on a standard insulin syringe provides exactly 166mcg of AOD-9604.

05

The prepared solution can be administered subcutaneously (Sub Q). Injections can be either site-specific or administered in the lower abdominal fat area.

06

Once reconstituted with Bacteriostatic Water, the solution should be stored in a refrigerator. Use the mixed solution within 60 days to ensure potency and effectiveness.

When to Take it

When to Take: The Night Strategy

  • Optimal Timing: Before Bed.

    • Expert Tip: The most common side effect of MT2 is mild nausea and facial flushing that lasts for about 30–60 minutes after injection. By taking it right before bed, you simply sleep through the “nausea window.”

Melanotan II (10mg) Dosage Guide

For a 10mg vial, reconstituting with 3ml of Bacteriostatic Water is the standard. This provides a concentration of 3.33mg/ml, making it easy to measure precise doses.

  • Beginner “Loading” Dose (250mcg): Draw to the 7.5-unit mark.

    • Ideal for: The first 3–5 days to introduce the peptide and minimize side effects.

  • The Sweet Spot (500mcg): Draw to the 15-unit mark.

    • Ideal for: The primary tanning phase once tolerance is established.

  • Advanced “Blast” Dosage (1,000mcg / 1mg): Draw to the 30-unit mark.

    • Ideal for: Experienced users looking for rapid pigmentation or breaking a plateau.

Protocol & Cycle Length

  • The Loading Phase: Administer your dose once daily until your desired color is reached (usually 7–14 days).

  • The Maintenance Phase: Administer your dose once or twice per week to lock in and maintain the pigment.

  • MT2 is a catalyst. You only need 15–20 minutes of UV exposure every other day during the loading phase to “activate” the melanin and see results.

Administration Tips

  • The “Mole Awareness” Rule: MT2 will darken existing freckles and moles first. This is normal; as your overall skin tone darkens, the contrast will level out.

  • Appetite Suppression: MT2 is a potent appetite suppressant. If you find you are losing too much weight during the loading phase, lower your dose to the 250mcg mark.

Seek Guidance From a Medical Professional

Before contemplating the usage of anabolic steroids, it’s essential to seek advice from a qualified healthcare professional. They can evaluate your general health, discuss possible risks and advantages, and offer personalized guidance based on your specific needs.

Get High-Quality Items From Trusted Sources

Make sure to procure anabolic steroids from trustworthy sources to reduce the likelihood of receiving counterfeit or tainted products. Only buy from reliable suppliers who adhere to quality control standards and have a favorable reputation within the community.

Start Slow and Progress Gradually

If you opt to incorporate anabolic steroids, it is recommended to initiate the regimen with the smallest effective dosage. Incrementally raise the dosage if required, while closely monitoring your body’s reactions and any potential adverse effects.

Prioritize Proper Post-Cycle Therapy

Following the conclusion of a steroid cycle, it’s crucial to engage in a thorough post-cycle therapy routine. This aids in restoring natural hormone production, minimizing side effects, and preserving overall health and well-being.

When to Take it

When to Take: The Night Strategy

  • Optimal Timing: Before Bed.

    • Expert Tip: The most common side effect of MT2 is mild nausea and facial flushing that lasts for about 30–60 minutes after injection. By taking it right before bed, you simply sleep through the “nausea window.”

Melanotan II (10mg) Dosage Guide

For a 10mg vial, reconstituting with 3ml of Bacteriostatic Water is the standard. This provides a concentration of 3.33mg/ml, making it easy to measure precise doses.

  • Beginner “Loading” Dose (250mcg): Draw to the 7.5-unit mark.

    • Ideal for: The first 3–5 days to introduce the peptide and minimize side effects.

  • The Sweet Spot (500mcg): Draw to the 15-unit mark.

    • Ideal for: The primary tanning phase once tolerance is established.

  • Advanced “Blast” Dosage (1,000mcg / 1mg): Draw to the 30-unit mark.

    • Ideal for: Experienced users looking for rapid pigmentation or breaking a plateau.

Protocol & Cycle Length

  • The Loading Phase: Administer your dose once daily until your desired color is reached (usually 7–14 days).

  • The Maintenance Phase: Administer your dose once or twice per week to lock in and maintain the pigment.

  • MT2 is a catalyst. You only need 15–20 minutes of UV exposure every other day during the loading phase to “activate” the melanin and see results.

Administration Tips

  • The “Mole Awareness” Rule: MT2 will darken existing freckles and moles first. This is normal; as your overall skin tone darkens, the contrast will level out.

  • Appetite Suppression: MT2 is a potent appetite suppressant. If you find you are losing too much weight during the loading phase, lower your dose to the 250mcg mark.

(0 Reviews)

You may also like…

  • Sale
    ziotropin

    Ziotropin HGH (10iU)

    Somatropin 100iu kit

    Original price was: $310.00.Current price is: $279.00.
    Add to cart